Senior Function System Developer
Responsibilities & Tasks 1.Drive and participate 3G~5G radio product pre-development and early phase study 2.Define and Document 3G~5G Radio function architecture and solution 3.Analyze 3G~5G Radio function impact to RAN feature 4.Define and Document Radio function description as input to radio software design 5.Drive TR solving especially on those software TRs closely related to radio hardware 6.Guide software designer to understand radio function and check if software implementation comply with function definition Position Qualifications 1.MSc level in a technical discipline or the equivalent level of knowledge 2.At least 3 years of experience working with R&D (design, system or I&V) is required 3.Experience of developing embedded systems (SW and HW) is required 4.Experience of Radio Base Station related R&D and Radio Access technology (GSM WCDMA and LTE) is required 5.Knowledge on radio TX and RX function such as gain control, time delay control and VSWR etc 6.Knowledge on radio hardware basic component and the production calibration method 7.Knowledge on O&M of base station such as carrier set-up and delete process, fault management, radio access and configure process and radio software management is preferred 8.Knowledge on CPRI including Layer1,2,3 is preferred 9.Knowledge on DDC/DUC, CFR and DPD is preferred 10.Service minded and self-motivated 11.Planning and organizational skills 12.Problem solving skills 13.Excellent communication skills 14.Fluent in English, both written and spoken |